Postes de travail réglables ESD FL 1200 mm

Authorised UK DistributorSuppliers of Industrial Ergonomic Workstations and Logistics Systems

SKU: GB-E-FL1245

MPN: FL/ESDHPL

At a glance

What it is
A 1200 mm wide ESD four-leg (F.L.) height-adjustable workstation, in a choice of bench depths.
Best for
ESD-protected work that puts more weight on the bench than a cantilever design should carry.
Key facts
1200 mm wide; bench depth 450, 600, 750 or 900 mm; height adjustable; modular; multi-connector earthing point for 10 mm snaps and 4 mm banana plugs.

Description

La conception à quatre pieds réglable en hauteur offre une flexibilité encore plus grande lorsque des capacités de charge et une stabilité plus élevées sont requises.

Sa construction modulaire robuste offre à la fois un design esthétique et la possibilité d'adapter n'importe lequel des accessoires de poste de travail supérieur et inférieur de la gamme d'accessoires . Tous les accessoires sont disponibles dans notre couleur standard 00A05 gris, ils peuvent être installés sur toute la gamme, standard ou ESD. Les tiroirs et les armoires sont universels pour la gamme, standard et ESD

Protection ESD complète

Connecteur multiple unique - Notre connecteur multiple isolé unique permet des connexions à pression de 10 mm ou à banane de 4 mm pour les bracelets et les cordons. Les points de mise à la terre, fiche banane de 4 mm / connecteur à pression de 10 mm, sont isolés par le rail avant du poste de travail.

CLIQUEZ ICI POUR LES ACCESSOIRES DE POSTE DE TRAVAIL

Trous d'emplacement de 40 mm pour accepter les poteaux de support arrière pour tous les accessoires du banc supérieur.

Tous les plans de travail de 20 mm sont équilibrés par un noyau en MDF. Des bords laqués ou doux au toucher sont proposés en fonction de la surface du plan de travail et de l'application. Les plans de travail ESD sont fournis uniquement en gris pâle. Nous fournissons tous les plans de travail ESD avec un bord avant arrondi et une finition laquée à base d'eau sur tous les bords.

Chacune de nos gammes de postes de travail peut être fournie avec une protection ESD, en utilisant l'un des éléments suivants :

  • Stratifié Microstat® ou Florite - gris, 10 5 - 10 7 ohms

  • Caoutchouc synthétique doux au toucher, bleu/gris, 10 7 - 10 9 ohms

Features

Disponibilité des tailles :

Les postes de travail FL Design sont réglables en hauteur jusqu'à 760, 840, 880 et 920 mm et disponibles dans les tailles suivantes :

  • Longueur : 1000 mm, 1200 mm, 1500 mm, 1800 mm, 2000 mm
  • Profondeur : 450 mm, 600 mm, 750 mm, 900 mm

Tous les postes de travail sont livrés avec des pieds réglables à des fins de mise à niveau.

Couleur:

Finition par revêtement en poudre selon BS4800 - 00A05 GRIS.

Plans de travail :

Les plans de travail sont disponibles avec les finitions suivantes :

  • Stratifié gris pâle
  • Marmolium gris/bleu
  • MDF

Download datasheets

Frequently asked questions

Who are Technibench?

A UK manufacturer of industrial and technical workbenches, founded in 1997 and based in Wolverhampton. Every workstation is built to order in the UK, with the standard specifications also held in stock.

What is the difference between the C.L. and F.L. workstations?

C.L. is the cantilever frame: open underneath with access from the side, made for seated assembly work at a fixed 760 mm height. F.L. has a leg at each corner for higher loads and stability, and its height adjusts between 840 and 920 mm for standing work.

What makes the ESD version different?

The worktop is a static-dissipative Microstat or Florite laminate, with two dedicated earthing points isolated through the front rail. A multi-connector takes 10 mm snap studs and 4 mm banana plugs, so wrist straps and mat cords plug straight in.

Do Technibench ESD benches meet BS EN 61340-5-1?

Yes. They are made for EPAs run to BS EN 61340-5-1: the dissipative worktops measure 10⁷ to 10⁹ ohms, within the limits the standard sets for work surfaces, and the earthing points bond the bench to your common ground.

What sizes are available?

We list 1000, 1200, 1500, 1800 and 2000 mm widths in both C.L. and F.L. frames. Technibench also make lengths from 600 to 2000 mm, depths from 450 to 900 mm and an 840 mm-high C.L. frame to order, so ask us if you need something else.

What is the worktop made of, and what colour is the frame?

A 20 mm laminate top with a radiused, water-based lacquered front edge: pale grey as standard, with grey/blue Marmoleum or plain MDF to order. Frames are powder-coated grey (BS 00A05) and stand on adjustable levelling feet.

Can I add drawers, shelves, lighting and power to the bench?

Yes. The frames take rear posts for upper shelves, light and tool rails, monitor arms and louvre, pin or tool panels, a service panel for power and data, and under-bench drawers and cupboards that fit across the whole range. See the bench accessories.

How long does delivery take?

Benches are built to order in the UK rather than picked from a shelf, so the lead time depends on the specification and Technibench's workload. We confirm it when you order, or beforehand on request. Benches travel by pallet, and any pallet charge is agreed with you first.

Can Technibench make a bespoke bench or a full workshop layout?

Yes. Custom sizes, cut-out or eccentric worktops, extra colours, bespoke accessories and integration with existing benching are all available. Technibench will visit, measure and plan the space, and you get a no-obligation quote with build and installation timescales.

Is there a discount for ordering several benches?

Yes. Quantity price breaks are shown on each bench's page, and for larger fit-outs call 01202 588900 or email sales@grovesales.co.uk for a project price.

Is Grove Sales an authorised Technibench distributor?

Yes. We supply the Technibench workstation and accessory range from Christchurch, Dorset, and can put bespoke requirements to them for you.

Prices Ex. VAT

BUY 5+\u003e5 SAVE 5+\u003e5%

Stock Profondeur du banc SKU 1-4 5+\u003e5 Qty Total
0 450 mm GB-E-FL1245 £496.87
Ex. VAT
£496.87
Ex. VAT
£0.00
Ex. VAT
0 600 mm GB-E-FL1260 £560.75
Ex. VAT
£560.75
Ex. VAT
£0.00
Ex. VAT
0 750 mm GB-E-FL1275 £624.62
Ex. VAT
£624.62
Ex. VAT
£0.00
Ex. VAT
0 900 mm GB-E-FL1290 £688.64
Ex. VAT
£688.64
Ex. VAT
£0.00
Ex. VAT
Choose quantities in the table
Your total shows here as you go.

If stock level is 0 or not shown, you can still ORDER ONLINE and we will advise you by email when your back-ordered item/s will be delivered.

About Technibench

Authorised UK DistributorSuppliers of Industrial Ergonomic Workstations and Logistics Systems

Founded in 1997, Technibench has grown from a small, hands-on operation into a trusted supplier of industrial workbenches and logistics systems across the UK and Europe.

ESD F.L. Technibench

Postes de travail réglables ESD FL 1200 mm

£496.87
Choose options

Product Inquiry

For more information about this product, please get in touch. Simply fill out the form, specify the product you’re interested in, and a member of the team will get back to you. Alternatively, you can use our LIVE CHAT and speak directly to a member of our Sales Team.