Module de panneau arrière - Panneau à persiennes

A UK manufacturer of industrial and technical workbenches, founded in 1997 and based in Wolverhampton. Every workstation is built to order in the UK, with the standard specifications also held in stock.

C.L. is the cantilever frame: open underneath with access from the side, made for seated assembly work at a fixed 760 mm height. F.L. has a leg at each corner for higher loads and stability, and its height adjusts between 840 and 920 mm for standing work.

The worktop is a static-dissipative Microstat or Florite laminate, with two dedicated earthing points isolated through the front rail. A multi-connector takes 10 mm snap studs and 4 mm banana plugs, so wrist straps and mat cords plug straight in.

Yes. They are made for EPAs run to BS EN 61340-5-1: the dissipative worktops measure 10⁷ to 10⁹ ohms, within the limits the standard sets for work surfaces, and the earthing points bond the bench to your common ground.

We list 1000, 1200, 1500, 1800 and 2000 mm widths in both C.L. and F.L. frames. Technibench also make lengths from 600 to 2000 mm, depths from 450 to 900 mm and an 840 mm-high C.L. frame to order, so ask us if you need something else.

A 20 mm laminate top with a radiused, water-based lacquered front edge: pale grey as standard, with grey/blue Marmoleum or plain MDF to order. Frames are powder-coated grey (BS 00A05) and stand on adjustable levelling feet.

Yes. The frames take rear posts for upper shelves, light and tool rails, monitor arms and louvre, pin or tool panels, a service panel for power and data, and under-bench drawers and cupboards that fit across the whole range. See the bench accessories.

Benches are built to order in the UK rather than picked from a shelf, so the lead time depends on the specification and Technibench's workload. We confirm it when you order, or beforehand on request. Benches travel by pallet, and any pallet charge is agreed with you first.

Yes. Custom sizes, cut-out or eccentric worktops, extra colours, bespoke accessories and integration with existing benching are all available. Technibench will visit, measure and plan the space, and you get a no-obligation quote with build and installation timescales.

Yes. Quantity price breaks are shown on each bench's page, and for larger fit-outs call 01202 588900 or email sales@grovesales.co.uk for a project price.

Yes. We supply the Technibench workstation and accessory range from Christchurch, Dorset, and can put bespoke requirements to them for you.