MMP 10 Component Cutter

MMP 10 Component Cutter The MMP 10 is a pneumatic machine designed for end cutting of loose radial components, with pedal activation, capable of cutting up to 3000 components per hour. Suitable for
READ MORE

BUY 5+ SAVE 5%

Stock	Item	SKU	1-4	5+	Qty	Total
0	MMP 10 Component Cutter	GT-MMP-10	£948.68 Ex. VAT	£901.25 Ex. VAT		£0.00 Ex. VAT
0	MMP 10 Extra Plate (2mm and 3mm cutting length)	GT-MMP10-EP	£199.23 Ex. VAT	£189.27 Ex. VAT		£0.00 Ex. VAT

Pickup available at Grove Sales Ltd

If stock level is 0 or not shown, you can still ORDER ONLINE and we will advise you by email when your item/s will be delivered.

MMP 10 Component Cutter

The MMP 10 is a pneumatic machine designed for end cutting of loose radial components, with pedal activation, capable of cutting up to 3000 components per hour.
Suitable for cutting transistors, LEDs, capacitors, resistors, etc. The components must be inserted into the holes in the 51x43mm cutting area.
The standard cutting height is 3mm, but it can be varied by adding the supplied plate (1.5mm high), reaching a cutting height of 4.5mm.

A multi-height plate is available as an option, for cutting height of 3mm and 2mm / 2.54mm pitch on a single plate.

On request we produce custom plates.

Pitch: 2.54mm and multiples. Ø components: from 0.3 to 1.3mm Standard cutting height: 3mm (or 4.5mm with extra mask) Max no. of lead cut in a single operation: 60 at the same time Cutting area: 51x43mm Pedal activationCutting capacity: 3000 pcs/h Supply pressure: 6 bar Consumption: 50 Nl/min Weight: 6.5 Kg Dimensions: 28cm(L)x10cm(W)x7.8cm(H)