Name: Anti Static Floor/Wall Paint - Electroguard A40 (5 Litre) ESD - GREEN
Brand: Electroguard
SKU: 101-066
Price: 181.5 GBP
Availability: InStock

Anti Static Floor/Wall Paint - Electroguard A40 (5 Litre) ESD GREEN - RAL6002

Anti Static Floor/Wall Paint - Electroguard A40 (5 Litre) ESD

Anti Static Floor/Wall Paint - Electroguard A40 (5 Litre) ESD - GREEN

SKU:

101-066

MPN:

RAL6002

A Single Pack Water Based, Static Dissipative Acrylic paint, suitable for floors and walls. It is a high specification method of grounding personnel and preventing static build up at an inexpensive
READ MORE

DOWNLOAD INFORMATION DATASHEETS

1. Information Sheet

2. Technical Data Sheet

3. Safety Data Sheet

£181.50 Ex. VAT

Quantity | Minimum Order: 3

If stock level is 0 or not shown, you can still ORDER ONLINE and we will advise you by email when your item/s will be delivered.

A Single Pack Water Based, Static Dissipative Acrylic paint, suitable for floors and walls. It is a high specification method of grounding personnel and preventing static build up at an inexpensive price.

User Friendly
Electroguard A40 is a ready to use, single pack paint that is extremely easy to apply. A thorough stir of a single tin is all that is necessary before the paint is ready to be used on your floors and walls. The paint can be applied by brush or roller and the equipment may be cleaned after use in warm water.
Attractive
Electroguard A40 has excellent chemical resistance, can be easily cleaned and is highly durable. The paint has an attractive satin finish and is available in a range of colours.

Electroguard A40 is water based and has a low odour. A40 is now available with an Anti Slip finish for floors. Please enquire for further details.

Electrical Properties:

Surface Resistance: 10(5)-10(8) Ohms/Square

Resistance to Ground: 10(5)-10(8) Ohms

Conforms to: IEC 61340-5-1/2

Charge Decay: Conforms to MILB81705C

Two coats are recommended for best results and should be applied over a sound, sealed floor or wall, free from dirt, oil or any loose particles. It is strongly recommended that A40 not be applied over bare surfaces, concrete, wood, tiles, plasterboard etc. Where this occurs a Water Based Primer should be first applied. We advise against applying if the temperature is below 10°C or if the Moisture Content of the concrete surface to be applied over is greater than 15%. Curing times are dependent on temperature, humidity and ventilation.