NON STOCKED ITEM

The Weller WR 2002 Repair Station is a 2-channel unit with both soldering and desoldering irons. An optional hot air pencil can be added if desired

• Small repair kit for all repair work
• Simultaneous operation of 2 soldering tools up to 200W total
• All soldering tools up to 200W can be connected, however simultaneous operation of hot air and soldering is not possible.

Set contains: WR2, 2-channel supply unit (250W) WP 80 soldering iron (80W) LT B tip CLICK HERE FOR LT TIPS WDH 10 safety rest with brass wool DSX 80 desoldering iron (80W), DX 113 HM desoldering tip and CLICK HERE FOR DX TIPS WDH 30 safety rest with brass wool

Fuse: T500 mA (230 V / 50/60 Hz) Fuse overcurrent release: 1,6 A Temperature control of channels: Soldering and desoldering tool, continuously variable from 50°C - 550°C (150°F - 999°F) Temperature control range is tool independent Soldering iron WP 80 / WP 120: 50°C - 450°C (150°F - 850°F) Soldering iron WP 200 / WSP 150: 50°C - 550°C (150°F - 950°F) Desoldering iron DSX 80 / DXV 80 / DSX 120: 50°C - 450°C (150°F - 850°F) Hot air iron HAP 1: 50°C - 550°C (150°F - 950°C) Temperature accuracy: ± 9°C (± 17°F) Temperature stability: ± 2°C (± 4°F) Bleeder: Soldering tip (Tip to ground) conforms IPC-J-001 Bleeder voltage: Soldering tip (Tip to ground) conforms IPC-J-001 Pump: (periodic duty 30/30s) Max. vacuum: 0,7 bar Max. delivery rate: max. 10 l/min Hot air: max. 15 l/min Display: LCD Temperature control: Buttons Equipotentional bonding: Via 3.5 mm pawl socket at the back of device (hard grounded normal state) USB interface: no