Brazos articulados - Louvre

Authorised UK DistributorSuppliers of Industrial Ergonomic Workstations and Logistics Systems

SKU: GB-AA-L

MPN: AA/LP 1

At a glance

What it is
A folding articulated arm carrying a louvre panel.
Works with
Standard rear support posts, left or right hand.
Best for
Swinging parts bins in close to the operator and away again.
Key facts
Louvre panel 470 x 240 mm; adjustable centre joint and end swivel.
Description

Brazos articulados - Panel del Louvre

Los brazos articulados ergonómicos, que se pueden adaptar fácilmente a cualquiera de nuestros postes de soporte traseros estándar, ofrecen mayor flexibilidad al operador, proporcionando un fácil acceso a monitores VDU, información o piezas, según el tipo de brazo utilizado.

Con la capacidad de plegarse hacia la parte trasera de la estación de trabajo, se puede lograr el máximo uso de la superficie de trabajo.

Este brazo totalmente ajustable se puede colocar a cualquier altura en los postes de soporte traseros, tanto izquierdos como derechos. Con la articulación central ajustable y el extremo giratorio, el panel de lamas se puede presentar con el producto al operador o reposicionarlo fácilmente en la parte trasera de la estación de trabajo cuando no se utiliza.

Panel del Louvre: 470×240

El brazo se extiende de 200 mm a 480 mm.

Product Features
  • Ergonomic articulated arms for Louvre panels to enhance flexibility and operator comfort
  • Easily attaches to standard rear support posts for both left and right-hand installation
  • Fully adjustable arm with adjustable center joint and end swivel for precise positioning
  • Louvre panel size: 470 x 240mm for optimal product presentation
  • Arm extends from 200mm to 480mm to suit different workspace configurations
  • Foldable design to maximise work-surface usage when not in use
  • Ideal for environments requiring ergonomic flexibility and space optimisation
DOWNLOAD DATASHEETS

PRICE PER ITEM

£67.91

Ex. VAT

Envío calculado al finalizar la compra.

0 IN STOCK

If stock level is 0 or not shown, you can still ORDER ONLINE and we will advise you by email when your back-ordered item/s will be delivered.

YOU MAY ALSO LIKE

Frequently asked questions

Who are Technibench?

A UK manufacturer of industrial and technical workbenches, founded in 1997 and based in Wolverhampton. Every workstation is built to order in the UK, with the standard specifications also held in stock.

What is the difference between the C.L. and F.L. workstations?

C.L. is the cantilever frame: open underneath with access from the side, made for seated assembly work at a fixed 760 mm height. F.L. has a leg at each corner for higher loads and stability, and its height adjusts between 840 and 920 mm for standing work.

What makes the ESD version different?

The worktop is a static-dissipative Microstat or Florite laminate, with two dedicated earthing points isolated through the front rail. A multi-connector takes 10 mm snap studs and 4 mm banana plugs, so wrist straps and mat cords plug straight in.

Do Technibench ESD benches meet BS EN 61340-5-1?

Yes. They are made for EPAs run to BS EN 61340-5-1: the dissipative worktops measure 10⁷ to 10⁹ ohms, within the limits the standard sets for work surfaces, and the earthing points bond the bench to your common ground.

What sizes are available?

We list 1000, 1200, 1500, 1800 and 2000 mm widths in both C.L. and F.L. frames. Technibench also make lengths from 600 to 2000 mm, depths from 450 to 900 mm and an 840 mm-high C.L. frame to order, so ask us if you need something else.

What is the worktop made of, and what colour is the frame?

A 20 mm laminate top with a radiused, water-based lacquered front edge: pale grey as standard, with grey/blue Marmoleum or plain MDF to order. Frames are powder-coated grey (BS 00A05) and stand on adjustable levelling feet.

Can I add drawers, shelves, lighting and power to the bench?

Yes. The frames take rear posts for upper shelves, light and tool rails, monitor arms and louvre, pin or tool panels, a service panel for power and data, and under-bench drawers and cupboards that fit across the whole range. See the bench accessories.

How long does delivery take?

Benches are built to order in the UK rather than picked from a shelf, so the lead time depends on the specification and Technibench's workload. We confirm it when you order, or beforehand on request. Benches travel by pallet, and any pallet charge is agreed with you first.

Can Technibench make a bespoke bench or a full workshop layout?

Yes. Custom sizes, cut-out or eccentric worktops, extra colours, bespoke accessories and integration with existing benching are all available. Technibench will visit, measure and plan the space, and you get a no-obligation quote with build and installation timescales.

Is there a discount for ordering several benches?

Yes. Quantity price breaks are shown on each bench's page, and for larger fit-outs call 01202 588900 or email sales@grovesales.co.uk for a project price.

Is Grove Sales an authorised Technibench distributor?

Yes. We supply the Technibench workstation and accessory range from Christchurch, Dorset, and can put bespoke requirements to them for you.

About Technibench

Authorised UK DistributorSuppliers of Industrial Ergonomic Workstations and Logistics Systems

Founded in 1997, Technibench has grown from a small, hands-on operation into a trusted supplier of industrial workbenches and logistics systems across the UK and Europe.

Frequently bought together

Brazos articulados - Louvre

Brazos articulados - Louvre

£67.91

Product Inquiry

For more information about this product, please get in touch. Simply fill out the form, specify the product you’re interested in, and a member of the team will get back to you. Alternatively, you can use our LIVE CHAT and speak directly to a member of our Sales Team.